Homag KL 78/A20/S2 Z - Edgebanding - 2001
Vendido
Especificaciones
| Fabricante | Homag |
| Modelo | KL 78/A20/S2 Z |
| Año | 2001 |
| Condición | Usado |
| Made in | Germany |
| Control unit | HOMAG HOMATIC NC 21 |
| Board thickness | 600 mm |
| Edge thickness | 3 mm |
| Feed advance | 24 m/min |
| Tool changer | FK 13 |
| Tool change slots | 8 |
| Voltage | 400 V |
| Dimensions | L 9295 x W 1400 x H 1800 mm |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Descripción
Woodworking - Edgebanding
Used Homag industrial machinery – KL 78 /A20/S2/Z from 2001 located in The Netherlands. This vertical machining centre is equipped with a control unit HOMAG HOMATIC NC 21 and has a board thickness of 600 mm, 3 mm edge thickness, feed advance 24 m/min.
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*