Milltronics VM-16 I Vertical Machining Center I 1997
Caractéristiques
| Fabricant | Milltronics |
| Modèle | VM-16 |
| Année | 1997 |
| Condition | D'occasion |
| Made in | USA |
| Control unit | Centurion VI |
| X-Axis travel | 750 mm |
| Y-Axis travel | 400 mm |
| Z-Axis travel | 500 mm |
| T-slot clamping table length | 1150 mm |
| T-slot clamping table width | 400 mm |
| Motor power | 5.5 kW |
| Spindle speed | 6000 rpm |
| Spindle taper | ISO 40 |
| Number of tool pockets | 12 positions |
| Dimensions | L 2185 x W 1730 x H 2440 mm |
| Availability | Immediately |
| Observations | *Information can sometimes be inaccurate and change without notice! |
Description
Metalworking - Vertical Machining Center
Used Milltronics industrial machinery – VM16 from 1997 located in The Netherlands. This vertical machining center is equipped with a control unit Centurion VI and has a working area of 1150 x 400 mm, 6000 rpm spindle speed and motor power of 5.5 kW.
More info:
This machine has Dutch software and manuals. Also included are the original purchase invoices and all service intervals, coolant pump, Low working hours, 3x Toolholders and recently a new LCD monitor has been installed.
This has not been a production machine but has been used as a hobby and is therefore in very good condition!
____
* Please note that this description may have been translated automatically. The information of this classified ad are only indicative and change without notice! GLOMACHT recommends to check the details with the seller. Contact us for further information.*